| |
|
|
 Reznor®
Garage Heaters
Reznor Garage Heater Pricing
Reznor® V3 series model UDAP gas-fired unit heaters are available in 14 sizes
ranging from 30,000 to 400,000 BTUH gas input. Sizes 30-125 are approved for
residential application. All sizes are approved for commercial/industrial
installations. Model UDAP heaters are designed for 82-83% thermal efficiency
and are approved for installation in the United States and Canada by the Canadian
Standards Association(CSA).
Reznor® V3 Series unit heaters have a refreshing new appearance with a glossy
white cabinet finish, unique REZNOR mitered corner and less visible hardware.
Each size cabinet is easily suspended from either 2 or 4 suspension points, or an
optional hanger kit for all sizes allows for ceiling mounting. The low voltage
terminal strip on the outside of the cabinet makes connecting control wiring easy
with no panels to remove. The addition of a "G" terminal to the strip, along
with the new design of the circuit board, allows for fan only operation (without
adding relays). All units have a factory installed gas line nipple to the
exterior of the cabinet for easy gas service connection.
The preeminent new internal feature is the T-CORE2 ® heat exchanger and single
burner combustion system. Other standard features include a single-stage gas
valve, multi-try direct spark ignition with 100% lockout, pressure switch to verify
vent flow, resiliently isolated venter motor, venter wheel with improved housing,
resiliently isolated axial fan and motor assembly and a high temperature limit control.
Sizes 30-125 also include a flame rollout safety switch. Operation is controlled
through an integrated circuit board. The circuit board monitors heater operation
and has LED diagnostic indicator lights to identify abnormalities in control functions.
The new V3 series unit heaters are designed to provide all the features you expect
in a Reznor heater plus improved efficiency, easier installation and a new look
- both inside and out.
Features
- Sizes 30-125 certified for residential heating application
- Sizes 30-400 certified for commercial/industrial heating application
- 82-83% thermal efficient ~ TOP in its class!
- 50-60°F rise range
- NEW T-CORE2 ® design titanium stabilized aluminized steel heat exchanger
(patent pending)
- NEW T-CORE2 ® design single burner combustion system including a one-piece
burner assembly (patent pending)
- 115/1/60 supply voltage
- 115 volt open fan motor with internal overload protection
- Transformer for 24-volt controls
- Integrated circuit board with diagnostic indicator lights
- Fan relay (included on the circuit board)
- Multi-try direct spark ignition with 100% lockout
- Natural or propane single-stage gas valve (field adjustable for operation
to 9,000 ft elevation)
- Vibration/noise isolated fan and venter motors ~ designed for low noise
operation
- 2-pt and 4-pt suspension ~ standard on all sizes
- External terminal strip for 24-volt wiring
- External gas connection
- Full fan guard ~ engineered for safety
- Improved cabinet design with less visible hardware and a NEW Reznor appearance
- Look for the white unit with the unique mitered corner
Literature Available:
Reznor UDAS Unit Heaters:
Natural Gas and Propane Available
Reznor UEAS Unit Heaters:
Natural Gas and Propane Available
Reznor UDAP Unit Heaters:
Natural Gas and Propane Available
| Model |
Input BTU's |
A.F.U.E. % |
| |
|
|
|
UDAP-30 |
30,000 |
82-83 % |
|
UDAP-45 |
45,000 |
82-83 % |
|
UDAP-60 |
60,000 |
82-83 % |
|
UDAP-75 |
75,000 |
82-83 % |
|
UDAP-100 |
100,000 |
82-83 % |
|
UDAP-125 |
125,000 |
82-83 % |
|
UDAP-150 |
150,000 |
82-83 % |
|
UDAP-200 |
200,000 |
82-83 % |
|
UDAP-250 |
250,000 |
82-83 % |
|
UDAP-300 |
300,000 |
82-83 % |
|
UDAP-400 |
400,000 |
82-83 % |
|
|